Vaporesso Vibe SE – Getting Started Guide
The Vaporesso Vibe SE is designed to be simple, reliable, and easy to use. This guide will walk you through what to do when you first open the device, how to fill the pod, and how to get the best experience from it.
What’s in the Box
When you open your Vaporesso Vibe SE, you should find:
Vaporesso Vibe SE device
Vibe refillable pod
USB-C charging cable
User manual
Before using your device for the first time, it is recommended that you fully charge the battery.
Charging Your Device
Connect the USB-C cable to the charging port on the device.
Plug the other end into a USB power source.
The indicator light will show when the device is charging.
Once fully charged, disconnect the cable.
Using the device with a full battery will provide the best performance and consistent vapour.
How to Fill the Pod
The Vibe SE uses a refillable pod system that is quick and easy to top up.
Remove the pod from the device.
Locate the silicone filling port on the side of the pod.
Lift the silicone plug to reveal the fill hole.
Insert the nozzle of your e-liquid bottle into the hole.
Fill slowly, leaving a small air gap at the top.
Close the silicone plug securely.
Reinsert the pod into the device.
After filling a brand new pod for the first time, allow the liquid to soak into the coil for around 5 minutes before vaping. This helps prevent dry hits and protects the coil.
How to Use the Device
The Vaporesso Vibe SE is draw activated, meaning there are no buttons.
Simply inhale through the mouthpiece and the device will automatically produce vapour.
For the best experience:
Take slow, gentle puffs rather than sharp inhales.
Allow a few seconds between puffs so the coil can re-saturate with liquid.
Adjusting Airflow
Some versions of the Vibe SE include adjustable airflow.
If your device has this feature, you can move the airflow slider to control how tight or loose the draw feels.
More airflow gives a looser draw and more vapour.
Less airflow gives a tighter draw that feels closer to a cigarette.
When to Refill
You should refill the pod when the liquid level becomes low.
Avoid vaping when the pod is almost empty, as this can burn the coil and shorten the life of the pod.
When to Replace the Pod
Over time the coil inside the pod will wear out.
Signs that your pod needs replacing include:
Burnt or unpleasant taste
Reduced flavour
Darkening of the liquid in the pod
Reduced vapour production
Most pods last around 1 to 2 weeks depending on usage.
Helpful Tips
Keep your device upright when possible to avoid leaks.
Do not overfill the pod.
Use good quality e-liquid for best results.
Keep the device clean and wipe away any excess liquid.
Store away from heat and direct sunlight.
Need Help?
If you need advice choosing e-liquid, nicotine strength, or replacement pods, our team at Liquid Mist is always happy to help. We specialise in supporting customers who are moving away from cigarettes and are here to guide you through the process.